2 the handset display – Polycom SpectraLink NetLink E340 User Manual
Page 11
SpectraLink Corporation
Configuration and Administration—NetLink e340/i640 Wireless Telephone
Cisco CallManager and IP Phone 7960 Emulation
72-1082-02-G.doc
Page 11
3.2 The Handset Display
Icons
The top row of the handset display in the Cisco SCCP implementation is customized
to provide four line appearances with two calls on each. The top row icons and their
positions are shown below:
Signal strength
The signal strength icon indicates the strength of the signal from the AP and can
assist the user in determining if the handset is moving out of range. It is always
present on the display in the upper left corner.
Line indicators
The four line numbers indicate activity on each of the four possible line appearances.
The first tab indicates the active line and the second tab indicates its status.
Voicemail
The voicemail icon is activated when a new voicemail message is received if the
feature is supported by the phone emulation. It appears to the right of the signal
strength icon.
Download
The download icon indicates that the handset is downloading code. This icon only
appears while the handset is running the over-the-air downloader. It appears in the
same location as the voicemail icon.
Call status
The call status icons indicate the type of activity occurring on the first and second
call on the tabbed line.
Navigation arrows
The navigation arrow icons indicate up and down or left and right scrolling options.
Scroll through the display by pressing the
Up
and
Down
buttons on the left side of
the handset.
Signal strength icon
Line numbers
Voicemail indicator
Call one status
Call two status
Navigation arrows
Battery icon
Tab
Tab