Palm Tungsten T5 - Manual (Page 30)

Tungsten™ T5 Handheld 8
CHAPTER 1 Setting Up Your Handheld and Your Computer
Step 4: Connecting your handheld to your computer
In this step, you connect your handheld to your computer and synchronize for the first time.
Synchronizing simply means that any information you enter in one place (your handheld or
computer) is automatically updated in the other.
Be sure to synchronize the info in your handheld’s program memory at least
once a day so that you always have an up-to-date backup copy of this info on your computer.
0
1
Connect your handheld to your
computer:
a. Plug the USB sync cable into a
USB port on the back of your
computer.
b. Plug the cable into your
handheld.
Continued
IMPORTANT [ ! ]
Tip
If the Select User dialog
box appears during
synchronization, select
the username of the
handheld you want to
synchronize, and click OK.
»
Key Term
Third-party application
A software program that
runs on a Palm Powered
device, but is not created
or supported by
palmOne, Inc.
Tip
If you have problems with
your new handheld after
you synchronize, you
may need to update your
third-party applications.