Perle Systems IOLAN SCS - Manual (Page 88)

Advanced
88 IOLAN SDS/SCS/STS User’s Guide, Version 3.6
Advanced
Host Table
Overview
The Host table contains the list of hosts that will be accessed by an IP address or Fully Qualified
Domain Name (FQDN) from the IOLAN. This table will contain a symbolic name for the host as
well as its IP address or FQDN. When a host entry is required elsewhere in the configuration, the
symbolic name will be used.
Functionality
You can configure up to 20 hosts using IPv4 or IPv6 internet addresses on desktop IOLAN models;
you can configure up to 49 hosts on rack mount IOLAN models.
Field Descriptions
Configure the appropriate parameters:
IP Filtering Data Options:
z Allow all traffic—Allows any host to connect to the IOLAN.
z Allow traffic only to/from hosts defined with IP addresses—A security
feature that when enabled, the IOLAN will only accept data from or send
data to hosts configured in the IOLAN’s
Host Table .
Default: Allow all traffic
Add Button Adds a host to the host table.
Edit Button Changes a host that already exists in the host table.
Delete Button Deletes a host from the host table.