Perle Systems IOLAN SCS - Manual (Page 209)

209
Authentication
LDAP
Overview
If you are using LDAP with TLS , you need to download a CA list to the IOLAN that includes the
certificate authority (CA) that signed the LDAP certificate on the LDAP host by selecting Tools ,
Advanced , Keys and Certificates . See Keys and Certificates on page 232 for more information on
the LDAP certificate.
Field Descriptions
Configure the following parameters:
Host Name The name or IP address of the LDAP host. If you use a host name, that host
must either have been defined in the IOLAN’s
Host Table before the last
reboot or be resolved by DNS. If you are using TLS , you must enter the same
string you used to create the LDAP certificate that resides on your LDAP
server.
Port The port that the LDAP host listens to for authentication requests.
Default: 389
Base The domain component (dc) that is the starting point for the search for user
authentication.
Enable TLS Enables/disables the Transport Layer Security (TLS) with the LDAP host.
Default: Disabled
TLS Port Specify the port number that LDAP will use for TLS .
Default: 636