Perle Systems IOLAN SCS - Manual (Page 141)

141
Serial Port Profiles
Rlogin Settings
The Rlogin settings apply when the User Service is set to Rlogin or the Terminal profile has Require
Login selected and specifies an Rlogin connection to a host.
Configure the following parameter:
When Connect to remote system is selected, the Rlogin window requires the name of the user who
is connecting to the host.
Configure the following parameters:
Escape Defines the escape character. Returns you to the command line mode. This
value is in hexadecimal.
Default: 1d (ASCII value GS )
Terminal Type Type of terminal attached to this serial port; for example, ANSI or WYSE60.
Terminal Type Type of terminal attached to this serial port; for example, ANSI or WYSE60.
User This name is passed on to the specified host for the Rlogin session, so that the
user is only prompted for a password.