Perle Systems IOLAN SCS User Manual
Page 178
Serial Port Profiles
178
IOLAN SDS/SCS/STS User’s Guide, Version 3.6
Dial In
If the device is remote and will be dialing in via modem or ISDN TA, enable
this parameter.
Default: Disabled
Dial Out
If you want the modem to dial a number when the serial port is started, enable
this parameter.
Default: Disabled
Dial In/Out
Enable this option when you want the serial port to do either of the following:
z
accept a call from a modem or ISDN TA
z
dial a number when the serial port is started
Default: Disabled
MS Direct Host
Specify this option when the serial port is connected to a Microsoft Guest
device.
Default: Enabled
MS Direct Guest
Enable this option when the serial port is connected to a Microsoft Host device.
Default: Disabled
Dial Timeout
The number of seconds the IOLAN will wait to establish a connection to a
remote modem.
Range: 1-99
Default: 45 seconds
Dial Retry
The number of times the IOLAN will attempt to re-establish a connection with
a remote modem.
Range: 0-99
Default: 2
Modem
The name of the predefined modem that is used on this line.
Phone
The phone number to use when
Dial Out
is enabled.