beautypg.com

Line service commands, Set termtype show line, Set telnet-client – Perle Systems DS1 User Manual

Page 95: Configuration, see, Line

background image

Command Line Interface 95

Line Commands

Set Termtype

Description Sets the terminal type for the current terminal session. term1, term2, and term3 refer to

the user-uploadable custom terminal definitions. If these are not present, the default is
wyse60.

User Level Restricted, Normal, Admin
Syntax

Option

wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2|term3

Show Line

Description Shows the line settings/information.
User Level Admin
Syntax

Line Service Commands

Set Telnet-Client

udp

Sets the line to listen for and/or send UDP data.

vmodem

The Device Server port behaves as if it were a modem to the attached device.

set termtype

[wyse60|vt100|ansi|dumb|tvi925|ibm3151te|vt320|hp700|term1|term2
|term3]

Specifies the type of terminal connected to the line:

z

Dumb

z

WYSE60

z

VT100

z

ANSI

z

TVI925

z

IBM3151TE

z

VT320 (specifically supporting VT320-7)

z

HP700 (specifically supporting HP700/44)

z

Term1, Term2, Term3 (user defined terminals)

show line

Description Configures telnet parameters.
User Level Normal, Admin
Syntax

set telnet-client [termtype <terminal_name>] [line-mode on|off]

[map-cr-crlf on|off] [local-echo on|off] [echo <00-7f>]
[eof <00-7f>] [erase <00-7f>] [intr <00-7f>] [quit <00-7f>]
[escape <00-7f]

Options

termtype

Type of terminal attached to this line; for example, ANSI or WYSE60.

line-mode

When

On

, keyboard input is not sent to the remote host until

Enter

is pressed,

otherwise input is sent every time a key is pressed. Default is

Off

.

map-cr-crlf

Maps carriage returns (CR) to carriage return line feed (CRLF). The default value is

Off

.