beautypg.com

Motd commands, Netsave, Set motd show motd – Perle Systems DS1 User Manual

Page 107

background image

Command Line Interface 107

Administration Commands

Netsave

Description Transfers a file from the Device Server to a remote host using the TFTP protocol.
User Level Admin
Syntax
Options

configuration

Specifies that you are going to upload a configuration file from the Device Server to the

specified host or IP address.

crash

Specifies that you are going to upload a crash file from the Device Server to the

specified host or IP address.

<hostname/ip_address>

The IP address or host name for where the file you are uploading from the Device
Server is going. If you are using a host name, it must be resolved in either the Device

Server’s Host Table or a DNS server.

<filename>

The complete path and file name (cannot use a drive letter) for the file you are

uploading from the Device Server.

MOTD Commands

Set MOTD

Description Specifies the server/file that contains the message of the day (MOTD) that is displayed

when users log into the Device Server.

User Level Normal, Admin
Syntax
Options

host

file

Show MOTD

Description Show the Message of the Day (MOTD) settings.
User Level Admin
Syntax

netsave configuration|crash <hostname/ip_address> <filename>

set motd host <hostname> file <path_filename>

The host that the Device Server will be getting the Message of the Day file from.

The path and file name (do not use a drive letter), relative to the default path of your

TFTP server software, of the file that contains a string that is displayed when a user

connects to the Device Server.

show motd