Perle Systems DS1 - Manual (Page 60)

Configuring Lines
60 IOLAN Device Server User’s Guide, Version 1.0
VModem Settings
When the Line Service is set to VModem , the Device Server acts as a virtual modem. After a virtual
modem connection is established, data will flow in both directions in its original format.
Configure the following parameters:
Host Name
Port
Success
Failure
Suppress
Style
Direction
The direction in which information is received or relayed:
z None—UDP service not enabled.
z In—LAN to serial.
z Out—Serial to LAN.
z Both—Messages are relayed both directions.
The target host name.
The port number the target host is listening on for messages.
String that is sent to the serial device when a connection succeeds. If no string
is entered, then the string
CONNECT will be sent with the connecting speed, for
example CONNECT 9600 .
String that is sent to the serial device when a connection fails. If no string is
entered, then the string NO CARRIER will be sent.
If set to No , connection success/failure indication strings are sent to the
connected device, otherwise these indications are suppressed.
One of the following:
z Verbose—Return codes (strings) are sent to the connected device.
z Numeric—The following characters can be sent to the connected device:
1 Successfully Connected
2 Failed to Connect
4 Error