Using the devicemanager, Introduction, Starting a new session – Perle Systems DS1 User Manual
Page 47: Chapter 5 using the devicemanager, Chapter 5, using
IOLAN Device Server User’s Guide, Version 1.0
47
Using the
DeviceManager
Chapter 5
5
Introduction
This chapter provides information about configuring/managing the Device Server using the
DeviceManager. It is assumed that the DeviceManager has already been installed; if you still need to
install the DeviceManager, see
Using DeviceManager on page 23
.
Starting a New Session
When you start the DeviceManager application, the New Session window is displayed.
If you want to connect to a Device Server to manage/configure it, or assign a temporary IP address to
a Device Server, select the
Manage Device Server
tab. If you want to create a new or edit an existing
configuration file, select the
Configuration
tab.