Perle Systems DS1 - Manual (Page 71)

71
Tools
2. Enter the following information for each Device Server that you want to configure with the same
configuration file:
IP Address
Server Name
Password
Reboot Server
3. Click Add to add the Device Server to the download list. You can also click on a Device Server
and edit any information and then click Update to make the edits permanent.
4. Click the Download> button to start the download process. A status window will display with
the configuration download status.
Downloading Device Server Firmware
To upgrade the Device Server firmware (software), select Tools , Download Firmware to Unit . Once
the firmware download is complete, you will be prompted to reboot the Device Server. You can
choose to reboot the Device Server at another time by selecting
Tools , Reboot Server . Upgrading
the firmware does not affect the Device Server’s configuration file or downloaded custom files.
Enter the IP address of the Device Server that you want to download the
configuration to.
The name of the Device Server. The Device Server name that you put in
this field is passed into the configuration before it is downloaded to the
Device Server and cannot be left blank.
Enter the Admin user password for the Device Server.
Determines whether or not the Device Server is rebooted after it has
received the new configuration. The new configuration definitions will not
go into effect until the Device Server is rebooted.