Installation, Introduction, Iolan device server components – Perle Systems DS1 User Manual
Page 21: What’s included, What you need to supply, Available accessories, Chapter 2 installation
IOLAN Device Server User’s Guide, Version 1.0
21
Installation
Chapter 2
2
Introduction
This chapter tells you what is packaged with your IOLAN Device Server, how to power up the
Device Server to make sure it works correctly, and how to assign the Device Server an IP address
through the LAN.
IOLAN Device Server Components
What’s Included
When you open your IOLAN Device Server package, you should have the following components:
z
The Device Server
z
*External power supply
Note:
If the Device Server was bought in bulk, you must supply the power supply.
z
Quick Start Guide
z
Warranty Card
z
A CD-ROM containing documentation, firmware, DeviceManager, etc.
What You Need to Supply
Before you can begin, you need to have the following:
z
A serial cable
z
An ethernet 10/100BASE-T cable if you are connecting the Device Server to the network
Available Accessories
The following accessory is available for purchase for the Device Server:
z
DIN Rail Mounting Kit (35mm)
Contact your distributor for details.