Perle Systems DS1 - Manual (Page 106)

Administration Commands
106 IOLAN Device Server User’s Guide, Version 1.0
Show ARP
Description Shows the current contents of the ARP cache.
User Level Admin
Syntax
Show Bootup
Description Shows the Firmware and Configuration files specified for Device Server bootup.
User Level Admin
Syntax
TFTP File Transfer Commands
Netload
Description Transfers a file from a remote host to the Device Server using the TFTP protocol.
User Level Admin
Syntax
Options firmware
Specifies that you are going to download a new firmware file to the Device Server.
configuration
Specifies that you are going to download a new configuration file to the Device Server.
customlang
Specifies that you are going to download a custom language file to the Device Server.
term1|term2|term3
You can create and download up to three custom terminal definitions to the Device
Server.
<hostname/ip_address>
The IP address or host name where the file you are downloading to the Device Server
resides. If you are using a host name, it must be resolved in either the Device Server’s
Host Table or a DNS server.
<filename>
The complete path and file name (cannot use a drive letter) of the file you are
downloading to the Device Server.
configuration file
The path and file name (do not use a drive letter), relative to the default path of your
TFTP server software, of the configuration software for the Device Server that will be
loaded when the Device Server is rebooted.
host
The host name or IP address of the server that contains the configuration or firmware
file. If you use a host name, it must exist in the Device Server’s host table or be
resolved by DNS.
show arp
show bootup
netload firmware|configuration|customlang|term1|term2|term3
<hostname/ip_address> <filename>