Command shortcuts, Command options – Perle Systems DS1 User Manual
Page 76
CLI Conventions
76
IOLAN Device Server User’s Guide, Version 1.0
Command Shortcuts
When you type a command, you can specify the shortest unique version of that command or you can
press the ESC key to complete the command. For example, the following command:
set telnet-client map-to-crlf off
can be typed as:
set tel map off
or, you can use the ESC key to complete the lines as you go along:
set tel<ESC>net-client ma<ESC>p-to-crlf off
where the <ESC> key was pressed to complete the option as it was typed.
Command Options
When you are typing commands on the command line (while connected to the Device Server), you
can view the options by typing a question mark (?) after any part of the command to see what options
are available/valid. For example:
DS$ set vmodem ?
failure-string
host
port
style
success-string
suppress
DS$ set vmodem failure-string ?
DS$ set vmodem failure-string "Vmodem failed" ?
failure-string
host
port
style
success-string
suppress
Or press Enter to confirm command
DS$ set vmodem failure-string "Vmodem failed"
DS$ show vmodem
Host
Host Port
Success String
Failure String "Vmodem failed"
Suppress Off
Style Numeric
DS$