Printronix L1024 - Manual (Page 91)

3–47 Configuring the Printer
Font Weight
This option specifies the weight of font to be used for printing.
The selections are standard characters, bold characters, and extra bold characters.
The default value for this parameter is standard characters.
Drive B: Fonts
Values: Disabled or Enabled.
This tells the system if fonts installed in Drive B: should be used. If disabled,
your boot time will be shorter, but the printer will not use any fonts installed in
disk drive B.
NOTE: For PCL–V and IPDS, the fonts installed in Drive B: will always be
read.
Installed Fonts
This displays a list of fonts installed in the system. No selections may be made;
this is for information purposes only.
NOTE: The bitmapped fonts in IPDS will not be displayed in this menu.