Printronix L1024 - Manual (Page 30)

2–12 Setting Up the Printer
IMPORTANT
Do not squeeze the toner bottle as you pour the toner. Doing so could
cause the loose toner to be blown out of the hopper and contaminate the
printer and soil hands and clothes.
If the toner bottle does not empty completely, gently tap the end of the
bottle while holding it over the hopper.
4. Close the developer unit cover. Press the cover until you hear a “click”
which indicates that the developer unit is closed completely.
5. Clean up any toner that may have spilled during this process using one
of the moist towels that come with the cleaning kit inside the developer
kit.
NOTE: Some software stops communicating with the printer if the printer is
off line for more than two minutes. In this case, you may need to
restart your print job.
Starter Toner Bottle
(with spout attached)
Developer Unit Cover
(shown in the open position)
Figure 2–6. Filling the Toner Cartridge