beautypg.com

Printronix L1024 User Manual

Page 82

background image

3–38

Configuring the Printer

Paper Instruction Pol

Values:

Standard or Inverted. Must be set to match the host computer.

PI Line is used to signify that the eight data signals represent a special paper

motion command, not printable data.

Strobe Filter

Values:

Enable or Disable.

It must be set to match the host computer.

When set to the short filtering mode, this filter will reject all NSTROBE pulses

of less than 63 ns. When set to the default long filtering mode, all strobes of less

than 313 ns will be rejected.

Trailing Edge

Values:

Enable or Disable.

It must be set to match the host computer.

Normally, data is sampled from the data lines [8–1] on the falling edge of the

filtered NSTROBE signal. This option allows the data to be sampled on the

rising, or trailing, edge.