Printronix L1024 - Manual (Page 125)

1 Glossary
Glossary
ACIA Acronym for Asynchronous Communication Interface Adapter.
baud A unit of speed that measures the rate at which information is
transferred. Technically, baud rate is the reciprocal of the length
in seconds of the shortest pulse used to carry data. For example, a
system in which the shortest pulse is 1/1200 second operates at
1200 baud. On RS–232 serial lines, the baud rate equals the data
flow rate in bits per second (bps). To communicate properly, a
printer must be configured to operate at the same baud rate as its
host computer.
bit Contraction of binary digit. A digit in the binary (base 2) number
system: 0 or 1. A bit is the smallest unit of storage in a digital
computer, where 0 and 1 are represented by different voltages.
Groups of bits forms other units of storage called nibbles, bytes,
and words.
Boot–up The start–up procedure which causes a computer operating
system to be loaded into main memory.
buffer A reserved area in memory. Data are written to and read from the
buffer during data transfers.
charger The charge corona applies a high negative charge to the surface
of the photoconductor belt.
coax Coaxial cable. A type of cable with a single wire surrounded by
insulation and a braided shield.
configuration The act of setting a bunch of electrical and data control options
on a printer so that a computer and the printer can “talk” to each
other. When properly configured, a printer can receive data from
the computer, print the data, and send and receive control signals.
controller An independent functional logic unit in a data processing system
that controls data paths between one or more units of peripheral
equipment.