Printronix L1024 User Manual

Page 32

2–14

Setting Up the Printer

Install the Waste Toner Container

NOTE: The OPC drum unit must be removed before placing the waste toner

container into its opening.

Refer to Figure 2–8 and perform these steps:

CAUTION

The OPC drum unit is light sensitive. Install it within five minutes.

When removing the drum unit from the foil bag, do not touch the

surface of the drum unit. Fingerprints and scratches can damage the

drum surface and cause poor print quality. Do not rotate the drum unit

manually. Forced rotation will cause an incorrect count for the life of the

drum unit and may cause poor print quality.

If installed, remove the OPC unit by lifting it carefully out of the printer

and place it on a flat surface.

Remove one of the waste toner containers from the toner kit box.

NOTE: If the green cap is placed on the filling hole, it cannot be removed,

in which case the waste toner container should be discarded.

3. Make sure that the green cap is on the cap holder rather than on the

filling hole of the new waste toner container.

NOTE: The waste toner container must be properly seated in the printer or

the printer will display an error message when the printer cover is

closed.

Install the waste toner container in the printer as shown in Figure 2–8.