Printronix L1024 - Manual (Page 52)

3–8 Configuring the Printer
4. Press NEXT or PREV until the following is displayed:
DISK MANAGEMENT
Save Config.
5. Press DOWN.
6. Press NEXT or PREV to cycle through the options (1–8).
NOTE: Configuration “0” does not appear in this list. It is the default
configuration and can not be altered.
NOTE: If the “Protect Configs.” option is not enabled, the number
configuration selected will be erased in order to write the current
configuration. Make sure the number selected is empty or no longer
required before making this selection.
7. When the desired number is displayed, press ENTER to select it.
If the configuration number has been previously saved and the “Protect
Configs.” option is enabled, the following error message is displayed
briefly:
CFG FILE EXISTS
DELETE FIRST
If the configuration number has not been previously saved or the
“Protect Configs.” option is disabled, the JOB IN PROCESS light
flashes and the following is displayed briefly:
STANDBY . . .
The following is displayed to indicate the configuration is being saved:
Save Config.
(selected number) *