Polaris Offroad Vehicle - Manual (Page 48)

38
CONTROL AND PARTS FUNCTIONS
Engine Throttle and Choke
Throttle Lever
Engine speed and vehicle movement
are controlled by pressing the throttle le-
ver. The throttle lever is spring loaded
and engine speed returns to idle when
the lever is released. This vehicle is
equipped with a Polaris Electronic
Throttle Control (ETC) which is designed
to reduce the risk of a frozen or stuck
throttle. In the event the throttle should
stick in an open position, engine RPM
will diminish and power to the rear
wheels will cease when the operator re-
leases the throttle lever.
Choke Lever
Refer to the engine starting procedure on page 55 for correct choke and throttle
settings during starting.
WARNING
The Electronic Throttle Control (ETC) limits engine power in the event
of a throttle system malfunction and is provided for your safety. Do not
attempt to modify the ETC system or replace it with any after market
throttle mechanisms.
WARNING
Do not start or operate an ATV with sticking or improperly operating
throttle controls. A stuck or improperly operating throttle could cause an
accident resulting in severe injury or death.
Always contact your dealer for service repairs whenever throttle prob-
lems arise.
Failure to check or maintain proper operation of the throttle system can
result in the throttle lever sticking during riding and cause an accident.
Always check the lever for free movement and return before starting the
engine and occasionally during riding.
Throttle
Choke