Pentax K20D User Manual

Page 75

Shoot

ing Funct

ions

14. AF by Press
Halfway

Sets whether to perform AF when the shutter
release button is pressed halfway.

15. Superimpose AF
Area

Sets whether to display the selected AF point
(focus position) in the viewfinder.

p.107

16. AF in remote
control

Sets whether to use Autofocus when shooting
with remote control.
Shutter releases after AF activates if shutter is
released from remote control when set to [On].
Shutter cannot be released until in focus.
AF does not activate at shutter release from
remote control when set to [Off].

17. Slow Shutter
Speed NR

Sets whether to allow the camera to select when
to reduce noise or to reduce noise only when
shooting at slow shutter speeds.

p.80

18. High-ISO Noise
Reduction

Sets whether to use Noise Reduction when
shooting with a high ISO. Select from three
levels.

p.80

19. Color temp. steps Sets the adjustment steps for color temperature. p.165
20. e-dial in Program Sets the e-dials in e (Hyper-program) mode.

21. e-dial in K
mode

Sets the e-dials in K (Sensitivity Priority) mode.

22. e-dial in b mode Sets the e-dials in b (Shutter Priority) mode.

23. e-dial in c mode Sets the e-dials in c (Aperture Priority) mode.

24. e-dial in L & a

Sets the e-dials in L (Shutter and Aperture
Priority) mode and a (Hyper-manual) mode.

25. e-dial in p & M

Sets the e-dials in p (Bulb) mode and M (Flash
X-sync speed) mode.

26. Green button in
L

& a

Selects the exposure adjustment method when
the Green button is pressed in L (Shutter and
Aperture Priority) mode or a (Hyper-manual)
mode.

p.95

27. Illuminate LCD
panel

Sets whether to illuminate the LCD panel.

p.29

28. Release when
Charging

Sets to release shutter while the built-in flash is
charging.

p.137

29. Flash in Wireless
Mode

Sets the built-in flash discharge method in
wireless mode.

p.146

30. Preview Method

Sets Preview Method when the main switch is
turned to the preview position (|).

p.113

Item

Function

Page