Pentax K20D - Manual (Page 120)

119
Shoot
ing Funct
ions
4
You can take pictures continuously at approximately 21 frames per second.
In this mode, images are saved with JPEG Quality set to Y (1536×1024)
regardless of the save format setting (p.156). The JPEG Quality set in the
[A Rec. Mode] menu is used.
1
Press the { button.
The Fn menu appears.
2
Press the four-way controller (2)
and use the four-way controller
(45) to select j.
3
Press the 4 button.
The camera is ready to take pictures continuously.
4
Press the shutter release button halfway.
The autofocus system operates. The focus indicator ] appears in the
viewfinder when focused.
5
Press the shutter release button fully.
Pictures are taken continuously while the shutter release button is fully
pressed until the camera buffer memory is full (JPEG Quality C:
maximum of approximately 115 pictures). The focus is locked during
shooting.
Burst Shooting
• The mirror raises during shooting and Instant Review is displayed
continuously on the monitor.
• The flash is turned off and the | button operation is unavailable in this mode.
• Multi-exposure and Auto Bracket are disabled in this mode.
• Select a setting other than j in the Drive Mode options screen to cancel
burst shooting. The setting is canceled when the camera is turned off if [Drive
Mode] in [Memory] of [A Rec. Mode] menu (p.236) is set to P (Off).
D r i v e M o d e D r i v e M o d e
B u r s t S h o o t i n g B u r s t S h o o t i n g
D r i v e M o d e
B u r s t S h o o t i n g
O K O K O K OK