Pentax K20D User Manual

Page 269

268

Appendi

LCD Panel Display

is lit = Built-in flash ready, b is blinking = Flash should be

used or incompatible lens is being used, 3 = Auto discharge,
>

= Redeye reduction, Q = Slow-speed sync, 9=Single

frame shooting, j = Continuous shooting, g = Self-timer,
h

= Remote control shooting, ? = Battery exhaustion

warning, ] = Auto bracket exposure (EV steps can be set to 1/
2 EV or 1/3 EV), N = Flash exposure compensation, Confirm
sensitivity, Shutter speed, Aperture value, White Balance,
Remaining capacity, m = EV compensation, PC (mass storage)/
Pb (PictBridge) appears when the USB cable is connected, EV
bar, 1, 1P

Preview Function

Live View: TTL method using the image sensor, Zoom Display

and Show Grid are usable

Optical Preview: Depth of field confirmation (electronically

controlled and usable in all exposure modes)

Digital Preview: Composition, exposure, focus and white

balance confirmation

Continuous shooting
(Hi/Lo)

Up to approx. 3 fps, JPEG: up to 38 frames (Hi) / until SD
Memory Card is full (Lo), RAW: up to 14 frames (PEF) / up to 16
frames (DNG)

Burst Shooting

Approx. 21 fps, JPEG (Y/C): up to approx. 115 frames

Self-timer

Electronically controlled with delay time of 12 sec./2 sec. (with
mirror up function). Start by pressing the shutter release button.
Operation confirmation: Possible to set beep. Can be cancelled
after operation

Remote Control

PENTAX Remote Control F (optional) Release shutter
immediately or three seconds after pressing the remote control
shutter button, Remote Continuous Shooting

Mirror

Quick-return mirror, mirror up function (2 sec. self-timer)

Custom Image

Image Tone (6 types), Saturation/Filter Effect, Hue/Toning,
Contrast, Sharpness

Exposure Bracket

Three or five frames (underexposed, proper exposure and
overexposed) are shot continuously with exposure bracketing.
(Selectable between 1/2 EV and 1/3 EV for EV steps)

Extended Bracket

Three frames are saved continuously with white balance,
saturation, hue, contrast and sharpness bracketing.

Multi-exposure

Select the number of shots between 2 and 9 (Auto EV Adjust can
be set according to the number of shots)

Exposure Meter/
Exposure Range

TTL multi (16-segment metering), Exposure range from EV 0 to
EV 21 at ISO 100, with 50 mm f/1.4 lens, Center-weighted and
Spot metering mode can be set

EV Compensation

±3 EV (1/2 EV Steps), ±2 EV (1/3 EV Steps), EV Steps can be
selected

AE Lock

Button type (timer type: two times the meter operating time set
in Custom Setting) Continuous as long as the shutter button is
halfway pressed.