Philips Pronto TS1000 - Manual (Page 15)

1. Open the Mode Menu and select "DEL" mode.
2. Open the device menu.
3. While holding the right hard button, select the device you'd like to remove the command from.
4. When prompted, select "Delete Device Action".
If you're using ProntoEdit:
1. Upload your configuration from the Pronto if you have not done so already.
2. Double−click on the device name.
3. Double−click on the "Properties" option.
4. Under the "Action" tab, delete the [C] UDB command.
5. Download your setup back to the remote.
A4−03 Why is the REVERT button grayed out?
The "revert" function is only available after you have made changes on the physical remote. Whenever
you download a CCF from the computer this function is disabled, and you must make at least one
change to your file on the remote before it will again become active.
Remember, if you would like to change back to the original factory default CCF file it is distributed
along with all software packages in the /SAMPLES/ directory as default.ccf.
A4−04 I hear there's a hidden game on the remote?
You've heard correctly! Built−in to every remote based on the Pronto is a hidden game, very similar to
Tetris. To access it:
On the Philips Pronto, Marantz RC5000 and Onkyo CHAD:
•
While holding [LIGHT], [LEFT] and [RIGHT] at the same time:
•
Press [MUTE]
•
Press [CH+]
•
Press [MUTE]
•
Press [CH+]
•
Press [VOL−]
•
Release the [LEFT] and [RIGHT] keys before releasing [LIGHT].
Commands are:
•
[LEFT] = Left
•
[RIGHT] = Right
•
[VOL+] = Rotate
•
[VOL−] = Down
•
[CH+] = New Game
•
[CH−] = Pause
•
[MUTE] = Exit
On the Marantz RC5200 and RC9200:
•
While holding [LIGHT], [LEFT] and [RIGHT] at the same time:
•
Press [VOL+]
•
Press [VOL−]
•
Press [VOL+]
•
Press [VOL−]
RC: Philips Pronto & Marantz RC5000 Unofficial FAQ 15