Cable connections – Printronix P3000 Series User Manual
Page 202
Installation
10–6
Cable Connections
Perform the following steps and refer to Figure 10–4 and Figure 10–5 to connect the cables to the ped-
estal model and floor cabinet model printers, respectively.
1.
Verify that the voltage shown on the printer ID label (A) is within the same range as the site line
voltage and that the proper power cord has been selected. Refer to the Power Requirements sec-
tion on page 10–1.
2.
Make sure the printer power switch (B) is set to OFF (0).
3.
Connect the power cord between the printer’s AC power connector (C) and the AC line recepta-
cle.
4.
Connect the interface cable (customer supplied) between the appropriate printer interface con-
nector (D) and the host computer. Refer to the Interfaces chapter for a complete description of the
printer interface.
Figure 10–4. Cable Connections – Pedestal Models
- SL5000e (52 pages)
- T4204 (232 pages)
- T6200 (5 pages)
- ANSI Printer (106 pages)
- MVP Series (243 pages)
- P9000 Series (334 pages)
- T3308 (144 pages)
- SL5000 (16 pages)
- L5520 (244 pages)
- 182043 (5 pages)
- SL5000r MP2 (5 pages)
- P7000 (44 pages)
- SLPA7000r MP2 (5 pages)
- SL5000r MP (84 pages)
- Series 5 (248 pages)
- SL5000r (102 pages)
- T5000e (76 pages)
- PSA3 (102 pages)
- laser printers (12 pages)
- ThermaLine Series (412 pages)
- L1024 (136 pages)
- T5000e Series (78 pages)
- LQH-HWTM (302 pages)
- H-SERIES P7000 (210 pages)
- T5000R (96 pages)
- P5000 (2 pages)
- L1524 (148 pages)
- L5035 (278 pages)
- L5535 (180 pages)
- L5020 (248 pages)
- PrintNet Enterprise (330 pages)
- P7000 H-Series Cartridge Ribbon Printer (220 pages)
- SL_T5R Energy Star (412 pages)
- T2N (150 pages)
- P8000 Series Cartridge Ribbon Printer (414 pages)
- N7000 H-Series Cartridge Ribbon Printer (292 pages)
- PrintCart (62 pages)
- SL5000r RFID Smart Label and Thermal Printers (394 pages)
- P7000 Cartridge Ribbon Printer (378 pages)
- SL4M (308 pages)
- P7000 OpenPrint consumables (2 pages)
- P5000LJ Series (336 pages)