Printronix P3000 Series - Manual (Page 126)

Programming 6–40
Form Feed
ASCII Hex Decimal
P–Series/
Serial
FF 0C 12
Purpose Prints the data in the buffer, advances the paper to the next top–of–form, and moves
the printhead to the first character column.
Comment The default forms length is determined by the configuration in nonvolatile memory.
Forms length is set by using the control panel F/L switch or forms length control
codes. Code FF cancels all single–line only print attributes.
The Form Feed command reacts differently in the P–Series and Serial Matrix emu-
lation modes when the VFU is active. Refer to the Vertical Format Units chapter.