Lexmark 5000 Series - Manual (Page 50)

13 If you want to print a list of blocked faxes:
a Press or repeatedly until Print appears.
b Press to print the list.
Blocking unwanted changes to fax settings using the control panel
This feature blocks network users from changing fax settings.
1 From the control panel, press Settings.
2 Press or repeatedly until Device Setup appears.
3 Press .
4 Press or until Host Fax Settings appears.
5 Press .
6 Press or until Block appears.
7 Press to save this setting.
Setting up a dialing prefix using the control panel
You can add a prefix of up to eight characters to the beginning of each number dialed. Characters can include
numbers, the symbols * and #, or a three-second pause created by pressing Redial / Pause. The pause appears as
a comma on the display.
1 From the control panel, press Fax Mode.
2 Press .
3 Press or repeatedly until Fax Setup appears.
4 Press .
5 Press or repeatedly until Dialing and Sending appears.
6 Press .
7 Press or repeatedly until Dial Prefix appears.
8 Press .
9 To change the setting, press or repeatedly until Create appears.
10 Press .
11 Enter the prefix to be dialed before each telephone number.
12 Press to save the setting.
50