Lanier AP206 User Manual
Page 51
Troubleshooting
38
4
Open Rear Cover
Remove Misfeed
There is a paper misfeed in the
printer.
Remove the misfed paper.
⇒ P.56 “When the Message
"Open Rear Cover Remove
Misfeed" Appears”
Paper Size Error
There is a difference between
the paper size in the tray and
the requested paper size from
the computer.
Check if the correct paper is
set
⇒ P.29 “Loading Paper”
Paper Type Error
There is a difference between
the paper type in the tray and
the requested paper type from
the computer.
Check if the correct paper is
set
⇒ P.29 “Loading Paper”
Remove Misfeed From Output
Tray
There is a paper misfeed in the
printer.
Remove the misfed paper.
⇒ P.57 “When the Message
"Remove Misfeed From Out-
put Tray" Appears”
Remove Misfeed From Paper
Tray
There is a paper misfeed in the
printer.
Remove the misfed paper.
⇒ P.54 “When the Message
"Remove Misfeed From Paper
Tray" Appears”
Reset Cleaner
Correctly
The fuser cleaner roller is not
installed in the printer.
Install the fuser cleaner.
⇒
P.76 “Replacing the Fuser
Cleaner”
Reset Fusing Unit Correctly
The fusing unit is not installed
in the printer.
Contact your sales or ser-
vice representative.
Reset PCU Correctly
The photoconductor unit is not
installed in the printer.
Install the photoconductor
unit.
⇒ P.68 “Replacing the
Photoconductor Unit”
Reset Paper Tray Correctly
The paper tray is not installed
correctly.
Install the paper tray cor-
rectly.
Reset Transfer
Roller Correctly
The transfer roller is not in-
stalled correctly.
Contact your sales or ser-
vice representative.
Reset xxx Toner Correctly
The indicated toner cartridge is
not installed in the printer.
Install the indicated toner
cartridge.
⇒ P.66 “Replacing
the Toner Cartridge”
Warming Up
The printer is warming up or
processing internally.
Wait until the printer re-
turns to the ready condition
or finishes processing inter-
nally.
Waste T Full
The waste toner bottle is full.
Replace the waste toner
bottle.
⇒ P.75 “Replacing the
Waste Toner Bottle”
Waste Toner is Full
The waste toner bottle is full.
Replace the waste toner
bottle.
⇒ P.75 “Replacing the
Waste Toner Bottle”
Message
Description
Comments