Lanier AP206 - Manual (Page 119)

Using the Operation Panel
106
5
E
Press
{{{{T T T T}}}} or {{{{U U U U}}}} to select “On” or “Off”, and then press {{{{#Enter}}}}.
j
Off l
This registers the setting and returns to the “Maintenance” menu.
F
Press
{{{{On Line}}}}.
The "Ready" message appears on the panel display.
Deleting the User Code Record
This procedure describes how to clear the User Code record.
Note
❒ If “Log Protect" is set to "On", you can not delete the User Code record. Select
"Off" in “Log Protect", and then follow the procedure below.
⇒ P.105 “Protect-
ing the User Code Record”
A
Check if the On Line indicator stays on. If not, press
{{{{On Line}}}}.
B
Press
{{{{Menu}}}}.
The following message appears on the panel display.
IPDL-C Menu l
C
Press
{{{{T T T T}}}} or {{{{U U U U}}}} to display "Maintenance", and then press {{{{#Enter}}}}.
Maintenance l
The following message appears on the panel display.
j
1.Toner Level l
Power On Line Data In
Reset
Escape Menu
Media Enter
Error
ZDHS031E