Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 99)

96
11
1. CALIBRATION OF GRADATION (Cont.)
Press the CALIBRATION key, then set the
printed out chart on the glass in the same
way as the first calibration.
Press the START key to start the second
calibration.
9 When the message “Scanning and
calibrating” disappears, press the TEST
PRINT key to print out the second test
chart.
10
When the message “Scanning and
calibrating” goes out, all the operation is
completed.
Tip: If you want to return the image quality
level to the default setting after the
calibration, press the DEFAULT key in
step 4.
12