Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 138)

133
WHEN THE GRAPHIC SYMBOLS FLASH
The paper size of the cassette can be changed to any of Ledger, Legal, Letter-R, Letter and
Statement. Use the following procedure.
3
1
2
4
Changing the Paper Size of the Cassette
Pull out the cassette slowly and fully.
Move the side guides so that the space
between them is slightly wider than the
desired paper size.
● To move the side guides, push the lever
(arrow q) to unlock.
Place paper in the cassette.
● For placing paper in the cassette, refer to Step
2 in “Adding Paper to the Front Cassette”
on page 132.
Remove and reset the size mark plate so
that the desired paper size appears.
5
Push in the cassette slowly and fully. 6
Set the back guide to the desired paper size
(shown on the cassette surface).
● To move the back guide, push on its sides
(arrows w) to unlock and slide it with both
of your hands.
Size mark plate
Paper size indicator
q
w