Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 66)

USING THE EDITING FUNCTIONS
63
4
5
6
Tip: Margins can be created also in the bypass
copy mode. To do this, set the paper in
the sheet bypass (see page 42), and press
the desired COPY-SIZE key to select the
desired paper size. If Letter-R paper is
used, press the corresponding COPY-SIZE
key twice.
Press the START key.
Select the desired copy size, image density
level, reproduction ratio and copy quantity.
Place the original on the glass.
● Only Letter is available during dual-page
copying.
2 Select on which side the margin is to be
created.
● Press the BOOK key.
● If you select the BOOK margin, use it in
conjunction with the DUAL PAGE mode.
Margin on the Book Originals
3 After having adjusted the margin,press the
SET key.
● The default margin is 7 mm.
● To adjust the margin:
Press the 2mm or 30mm key to select
the desired margin setting, and press the SET
key.
3 After having adjusted the margin,press the
SET key.
● The default margin is 7 mm.
● To adjust the margin:
Press the 0mm or 30mm key to select
the desired margin setting, and press the SET
key.
● When combining image shifting with duplex
copying, select FRONT for the left side and
BACK for the right side of the copy.