Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 135)

130
When the paper supply in the selected cassette or the optional large-capacity feeder runs
out, the cassette or large-capacity feeder symbol on the display panel flashes and this
message appears:
Add paper
Add paper as described below.
1
2
Adding Paper to the Front Cassette
1. ADD PAPER SYMBOL
Note: Check that there is a slight gap (about 0.5
mm) left between the paper and each of
the side guides as shown; the total gap
should not exceed 1 mm. If the gap is not
suitable, paper misfeeding may possibly
occur.
Place the paper in the cassette.
● Up to 600 sheets of paper (22lb.) can be set.
● Do not add paper above the line on the back
guide.
● Do not use creased, folded, wrinkled or damp
sheets of paper.
Pull out the cassette slowly until it comes
to a stop.
Limit line
Side guide Side guide
0.5mm 0.5mm