Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 97)

94
1. CALIBRATION OF GRADATION
This function allows the copier to automatically calibrate the color gradation
when the color cannot be adjusted well because the shading or the hue of the image has deviated.
●Set the recommended Ledger-sized paper in the cassette before starting the calibration.
●Be sure to use the paper recommended by Toshiba. If any other paper is used, the calibration
may not be performed properly.
●If the color often deviates, call your service technician.
Press the PROGRAM key to enter the
Program menu.
1
2
Press the Next key, then press the
CALIBRATION key.
Enter the password (4 digits) of your
administrator (key operator), then press
the SET key.
3
Tip: If you do not need the user control by the
password of the administrator, tell your
service technician.
4 Press the CALIBRATION key.
● The following message appears:
WAIT
Wait for approx. 30 seconds.