Lanier DIGITAL COLOR PRINTER/COPIER 5722 - Manual (Page 127)

122
When the optional sorter MG-2014 is attached to the copier, you can select the sort, group or
staple mode. Non-sort is automatically selected as the default mode.
1. DESCRIPTION OF THE MAIN COMPONENTS
STAPLE
Stapler*
Stapler cover*
Sort bins (Bins "1" ~"20")
Non-sort bin
Staple cartridge*
key*
In the non-sort mode, copies exit
into this bin. However, they will
also go into the sort bins when
more than 250 sheets are copied
or depending upon the size of
paper selected.
The lamp inside the key
lights when stapling is
possible or while stapling is
in progress.
In the sort or group mode, all
copies exit into these bins.
However, when more than 250
copies are set in the non-sort
mode, some of them will also
enter these bins.
Note: See page 162 for the details of the sorter specification.