Lexmark 7600 Series - Manual (Page 75)

Width:
– 76.2–215.9 mm
– 3.0–8.5 inches
Length:
– 127.0–355.6 mm
– 5.0–17.0 inches
• The paper is loaded in the center of the paper support.
• The paper guides rest against the edges of the paper.
Banner paper
You can load up to 20 sheets.
W F I I PR IN TI NG
Make sure:
• You remove all the paper from the paper support before loading the banner paper.
• You tear off only the number of pages needed to print the banner.
• You place the required stack of banner paper on a flat surface behind the printer.
• The leading edge of the banner paper feeds into the printer first.
• The paper is loaded in the center of the paper support.
• The paper guides rest against the edges of the paper.
Using the automatic paper type sensor
The printer is equipped with an automatic paper type sensing device. The Paper Type Sensor automatically detects
the type of paper that has been loaded into the printer and adjusts the settings for you. For example, if you want to
print a photo, load photo paper into the printer. The printer detects the type of paper and automatically adjusts the
settings to give you optimum photo-printing results.
Loading paper
75