Lexmark 7600 Series - Manual (Page 132)

R
ECONNECT THE POWER SUPPLY
1 Press to turn the printer off.
2 Disconnect the power cord from the wall outlet.
3 Gently remove the power supply from the printer.
4 Reconnect the power supply to the printer.
5 Plug the power cord into the wall outlet.
6 Press to turn the printer on.
T
EMPORARILY DISABLE SECURITY PROGRAMS IN
W
INDOWS
1 Close all open programs.
2 Disable any security programs.
3 Do one of the following:
• In Windows Vista, click .
• In Windows XP and earlier, click Start.
4 Click Computer or My Computer.
5 Double-click the CD or DVD drive icon.
6 If necessary, double-click setup.exe.
7 Follow the instructions on the computer screen to install the software.
8 When the installation is completed, enable the security software again.
Page does not print
These are possible solutions. Try one or more of the following:
C
HECK MESSAGES
If an error message appears, then resolve the error before trying to print again.
C
HECK POWER
If the light is not on, then make sure that the power cord is properly connected to the printer and plugged into
a known working electrical outlet that other electrical devices have been using.
R
EMOVE AND THEN RELOAD PAPER
C
HECK INK
Check the ink levels, and then install new print cartridges if necessary.
Troubleshooting
132