Lexmark 7600 Series - Manual (Page 102)

Making a duplex copy
Your printer comes with a built-in duplex unit that performs duplex copies on your document without the need to
manually re-orient the sheets. It picks the paper after printing on one side and feeds it back to the printer to print on
the side that is still blank.
Note: Use letter- or A4-size plain paper for making duplex copies. You cannot make duplex copies on envelopes,
card stock, or photo paper.
1 Load paper.
2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
• Adjust the paper guide on the ADF tray to the width of the original document.
• When using the scanner glass, close the top cover to avoid dark edges on the scanned image.
3 From the printer control panel, press .
4 Press the up or down arrow button until 2-Sided Copies is highlighted.
5 If you are copying a one-sided document:
a Press the left or right arrow button until 1 to 2 appears.
b Press .
If you are copying a two-sided document:
a Press the left or right arrow button until 2 to 2 appears.
b Press .
c Follow the instructions on the screen.
d Press .
Copying a two-sided document
1 Load paper.
2 Load an original document faceup into the Automatic Document Feeder (ADF) or facedown on the scanner glass.
Notes:
• Do not load postcards, photos, small items, transparencies, photo paper, or thin media (such as magazine
clippings) into the ADF. Place these items on the scanner glass.
• Adjust the paper guide on the ADF tray to the width of the original document.
• When using the scanner glass, close the top cover to avoid dark edges on the scanned image.
3 From the printer control panel, press .
4 Press the up or down arrow button until 2-Sided Copies is highlighted.
5 Press the left or right arrow button until 2 to 1 or 2 to 2 appears.
6 Press .
Copying
102