Lanier 5484 User Manual
Page 92
Copying
78
2
C
Enter the length of the original with the number keys and press the
[#]
key.
Note
❒ You can enter sizes within the following ranges:
❒ To change the length entered, press the {
Clear
} key on the control panel or
[Clear]
key on the display and enter the new length.
D
Enter the length of the copy with the number keys and press the
[#]
key.
Note
❒ To change the length entered, press the {
Clear
} key on the control panel or
[Clear]
key on the display and enter the new length.
❒ To change the length after pressing the
[#]
key, select
[Original]
or
[Copy]
key
and enter the desired length.
E
Set your original, then press the {
Start
} key.
Metric version
1 - 999 mm (in 1 mm steps)
Inch version
0.1" - 99.9" (in 0.1" steps)
This manual is related to the following products: