Lanier 5484 User Manual
Page 101
Duplex
87
2
Note
❒ If you want to change the copy direction to “Top to Bottom” press the
[Ori-
entation]
key, then press the
[Top to Bottom]
key. If you do not, go to step
E.
❒ The default setting is “Top to Top”. You can change this setting with the
copy User Tools.
⇒
P.312 “General Features”
To select “Top to Bottom”
A Press the
[Orientation]
key.
B Press the
[Top to Bottom]
key.
C Press the
[OK]
key.
D
Set your originals in the following way.
When setting an original on the exposure glass or in the document feeder
using Batch/SADF mode
Reference
A Set the original, then press the {
Start
} key.
Note
❒ Start with the first page to be copied.
B Set the next original. When it is placed on the exposure glass, press the
{
Start
} key.
C When the number of originals is odd, press the {
#
} key after the last
original has been scanned.