Using connect copy, 4using connect copy – Lanier 5484 User Manual

Page 260

Connect Copy (Option)

246

Using Connect Copy

You can select Connect Copy mode from either of the two connected machines
by pressing the

[Connect]

key. The machine you use becomes the master unit,

and the other machine the sub-unit.

Limitation

❒ Once Connect Copy is selected, you must carry out all operations on the mas-

ter unit.

Make sure the machine is in copy mode.

Note

❒ If user codes are turned on, enter a user code programmed in the master

unit with the number keys (up to 8 digits) then press the

[#]

key. You don't

need to enter the user code for the sub-unit.

Reference

See

⇒

P.70 “User Codes”.

Press the

[Connect]

key on the machine that is to be the master unit.

When the key darkens, the two machines are connected.

❖

Master unit display

This manual is related to the following products: