Lanier 5484 - Manual (Page 285)

If You Cannot Make Clear Copies
271
5
If You Cannot Make Clear Copies
Problem Cause Action
Copies appear dirty. The image density is too
dark. Adjust the image density
⇒
P.34 “Adjusting Copy Im-
age Density” .
Auto Image Density is not
selected. Select Auto Image Density.
The reverse side of an orig-
inal image is copied. The image density is too
dark. Adjust the image density
⇒
P.34 “Adjusting Copy Im-
age Density” .
Auto Image Density is not
selected. Select Auto Image Density.
A shadow appears on cop-
ies when copying pasted
originals. The image density is too
dark. Adjust the image density
⇒
P.34 “Adjusting Copy Im-
age Density” .
Set the original in a differ-
ent direction.
Fix mending tape to the
pasted part.
The same copy area is dirty
whenever making copies. The exposure glass or doc-
ument feeder belt is dirty. Clean them
⇒
P.337
“Maintaining Your Ma-
chine”
.
Copies are too light. The image density is too
light. Adjust the image density
⇒
P.34 “Adjusting Copy Im-
age Density” .
Damp or rough grain copy
paper is being used. Use dry paper without a
rough grain.
Toner cartridge is almost
empty. Add toner
⇒
P.283 “ D
Changing the Toner Bottle” .
Parts of the image are not
copied. The original is not set cor-
rectly. Set originals correctly
⇒
P.26 “Setting Originals”.
An improper paper size is
selected. Select the proper paper
size.
Copies are blank. The original is not set cor-
rectly. Set originals correctly
⇒
P.26 “Setting Originals”.
A moiré pattern is pro-
duced on copies. Your original has a dot pat-
tern image or many lines. Place the original on the
exposure glass at a slight
angle.
,,
,,,
,,,,
,,,,
yy
yyy
yyyy
yyyy
R