Kodak ESP 9200 - Manual (Page 86)

Troubleshooting
80 www.kodak.com/go/aiosupport
Status lights
There are three status lights on the printer: the power status light (on the on/off
button) indicates power, the Wi-Fi status light indicates Wi-Fi status, and the
attention light blinks when an error occurs.
Power status light
Wi-Fi status light
Get help with problems you cannot
resolve. Contact Kodak at www.kodak.com/go/contact
and have the following information available:
– Kodak Service Number (located inside the
printer when you open the printer access
door)
– Printer model number (located on the
control panel)
– Computer model, operating system, and
version of Home Center Software
Power light What it means
Off The printer is turned off.
• Press the on/off button to turn on power.
The printer does not have power.
• Make sure that the power cord is plugged into the back of the
printer and into an electrical outlet, and that the electrical
outlet has power.
Blinking The printer is busy.
• Wait for the printer to finish the task.
On The printer is ready.
Wi-Fi status light What it means
Off The Wi-Fi radio is either turned off or is turned on but not
connected to a wireless network.
Blinks continuously The Wi-Fi radio is turned on and the printer is searching for
available wireless networks within range.