Changing resolution and brightness, Sending a fax, Using the phonebook to send a fax – Kodak ESP 9200 User Manual
Page 68
Faxing
62
www.kodak.com/go/aiosupport
Changing resolution and brightness
Before sending your fax, change the resolution and brightness settings, as needed,
based on your original.
To modify settings before sending your fax:
1. Press
Fax
.
2. With
Fax Options
selected, press
OK
.
3. Press
to select
Resolution
.
The resolution setting determines the amount of detail that is transmitted.
Select:
•
Standard
(default) for most documents
•
Fine
for documents with fine print
•
Photo
for photographs
4. Press
to select
Brightness
.
Adjust the brightness setting according to how light or dark your original is.
Select:
•
Normal
(default) for most documents
•
+1
to
+3
to lighten dark originals
•
-1
to
-3
to darken light originals
NOTE: If you do not want to save these settings, send your fax. The settings will
apply only to the current transmission. If you want to save these settings as
defaults:
a. Press
to select
Save as Defaults
, then press
OK
.
b. Select
Yes
, then press
OK
.
Sending a fax
You can send your fax in several ways. You can use:
• the phonebook
• Quick Dial
• the numeric keypad
• the Redial button
Using the phonebook to send a fax
To send a fax to a number in the phonebook:
1. Press
Phonebook
.
2. Press
to select the desired number.
3. Press
Start Black
to send a black-and-white fax or
Start Color
to send a color fax.