beautypg.com

Editing a phonebook entry, Deleting a phonebook entry, Using the – Kodak ESP 9200 User Manual

Page 66: Ypad (see, Using

background image

Faxing

60

www.kodak.com/go/aiosupport

Editing a phonebook entry

To edit a phonebook entry:

1. Press

Phonebook

.

2. Make sure

Edit Phonebook

is selected, then press

OK

.

3. Press

to select

Edit Entry

, then press

OK

.

4. Press

to select the entry you want to edit, then press

OK

.

5. Press

to select the field you want to edit, then press

OK

.

6. Use the alphanumeric keyboard (see

Using the alphanumeric keyboard on the

LCD, page 61

) or the numeric keypad (see

Using the numeric keypad on the

control panel to enter text, page 60

) to make your change(s).

7. Press

to select

DONE

, then press

OK

.

Deleting a phonebook entry

To delete a phonebook entry:

1. Press

Phonebook

.

2. Make sure

Edit Phonebook

is selected, then press

OK

.

3. Press

to select

Delete Entry

, then press

OK

.

4. Press

to select the entry you want to delete, then press

OK

.

5. To delete the entry, press

OK

.

The entry is deleted from the phonebook.

6. Repeat steps 4 – 5 to delete more entries; when you are finished, press

Back

or

Cancel

.

Using the numeric keypad on the control panel to enter text

The number keys on the numeric keypad represent a number and several characters.
For example, the number

2

key also represents the letters A, B, C and a, b, and c. You

must press the

2

key multiple times to enter a corresponding letter. For example, to

enter the letter “B”, press the

2

key three times; to enter the small letter “b”, press

the

2

key six times.

If you need to use the same key for more than one letter in a row (for example, to
type “Cab”), you need to pause between letters. To type “Cab”, press the

2

key four

times to enter “C”, then pause 10 seconds; press the

2

key five times to enter “a”,

then pause 10 seconds; and press the

2

key six times to enter “b”.

Note that the Symbols (*) key and the Space (#) key also cycle through several
different symbols when you press the key multiple times.

To make a correction to your entry, use the

BKSP

(backspace) key on the

alphanumeric keyboard on the LCD (

see Using the alphanumeric keyboard on the

LCD

).

This manual is related to the following products: