Kodak ESP 9200 - Manual (Page 59)

www.kodak.com/go/aiosupport 53
7
Faxing
Your printer can send and receive faxes in either black-and-white or color.
Before you begin faxing
Before you can send or receive faxes, you must connect your printer and set up the
fax options on the printer.
Connecting the printer for faxing
1. Make sure that the selected Country/Region matches your location.
This setting determines how your faxes are sent and received.
a. Press Home .
b. Press to select Printer Settings , then press OK .
c. Press to select Country/Region, then press OK
d. Press to select your country or region, then press OK .
2. Determine the type of telephone service you have, and connect your printer
accordingly.
IMPORTANT: Use the phone cord that was provided with the printer. If you use any other
phone cord, you may not be able to send or receive faxes successfully.
• Standard telephone service — telephone service that uses dedicated
telephone wiring to transmit only phone signals
• Cable telephone service — telephone service that is delivered by a cable
television service
• Internet telephone service (Voice-Over-Internet-Protocol or VOIP) —
telephone service delivered by an Internet provider
If you have Standard, Cable, or Internet telephone service, connect one end of
the phone cord into the LINE IN port on the back of the printer and the other
end into the wall phone jack.