Kodak ESP 9200 - Manual (Page 70)

Faxing
64 www.kodak.com/go/aiosupport
Receiving a fax manually
If Auto Answer is turned off for your printer, you can receive incoming faxes
manually.
NOTE: You can receive any incoming fax manually, even if Auto Answer is
turned on.
To receive a fax manually:
• When you hear the phone ring, press Start Black or Start Color .
NOTE: Pressing either Start button triggers the printer to receive the fax. It does
not matter which Start button you press; whether a fax is color or black
and white is determined by the sender.
If your printer is connected to the same phone line as another telephone and you are
using tone dialing (see
Dialing Mode, page 58 ), you may receive an incoming fax
manually from another phone. When you hear the distinctive ring of your fax line or
know that the incoming call is a fax:
• Pick up any phone and dial 234 (the remote access code).