Kodak ESP 9200 - Manual (Page 81)

www.kodak.com/go/aiosupport 75
KODAK ESP 9200 Series All-in-One Printer
Updating the software and printer firmware
Using the latest software and firmware helps ensure optimal performance of your
printer.
NOTE: Firmware is the software that runs on your printer.
When you open Home Center Software on a computer with WINDOWS OS, the
software automatically checks for software and firmware updates. On a computer
with MAC OS, you must check manually for updates.
Use the following procedure to update manually.
Updating if your printer is connected to a computer with WINDOWS OS
To update the software :
1. Make sure that your computer is connected to the Internet.
2. Open Home Center Software.
3. Click Tools and Documentation .
4. Under Web Links, click Check for Software Updates to check whether software
updates are available.
5. If there are updates, click Next and follow the on-screen instructions.
To update the printer firmware :
1. Make sure that your computer is connected to the Internet.
2. Connect the printer to the computer with a USB cable, Ethernet cable, or
wirelessly (if not currently connected).
3. Open Home Center Software.
4. Make sure that the all-in-one printer name and “connected” appear in the
bottom left corner of the Home Center Software window.
5. Click Tools and Documentation .
6. Under Web Links, click Check for Printer (Firmware) Updates .
7. If there are updates, click Next and follow the on-screen instructions.
IMPORTANT: Do not turn off or unplug your printer or your computer during the update.