Powering your camera using the power module, Powering your camera using a battery, Charging batteries – Kodak 6B8773 User Manual
Page 48: Charging batteries -2

3-2
April 28, 2004
Powering Your Camera
Powering Your Camera using the Power Module
1. Insert the power module in the battery slot on the camera and turn the
latch clockwise.
2. Insert the power module cable into the power module and into the
port on the charger/adapter.
3. Using the appropriate international power cord, plug the
charger/adapter into an electrical outlet.
The Power LED is green when the charger/adapter is powered.
NOTE: You cannot charge batteries while the power module cable is
connected.
Powering Your Camera using a Battery
Charging Batteries
1. Remove the power module cable from the charger/adapter if it is
connected.
2. Plug the charger/adapter into an electrical outlet.
The Power LED is green when the charger/adapter is powered.
latch
Power LED
- LS753 (73 pages)
- LS753 (64 pages)
- DX7590 (82 pages)
- CX7220 (72 pages)
- CX7220 (60 pages)
- C533 EN (67 pages)
- CX7330 (61 pages)
- LS443 (122 pages)
- Z760 (91 pages)
- Z760 (79 pages)
- DX3900 (105 pages)
- Z700 (78 pages)
- CD40 (79 pages)
- Z7590 (118 pages)
- Z7590 (104 pages)
- Z612 (101 pages)
- Z612 (90 pages)
- DC3400 (156 pages)
- CX4200 (106 pages)
- Z650 (94 pages)
- Z650 (77 pages)
- DX7440 (67 pages)
- LS755 (83 pages)
- LS755 (80 pages)
- V610 (106 pages)
- V610 (87 pages)
- Z740 (70 pages)
- CX7530 (66 pages)
- CX7530 (67 pages)
- CX7530 (83 pages)
- CX7525 (83 pages)
- CX7525 (66 pages)
- V530 (95 pages)
- V530 (73 pages)
- C643 (83 pages)
- EASYSHARE C603 (72 pages)
- C340 (83 pages)
- C340 (74 pages)
- EasyShare C340 (74 pages)
- V603 (91 pages)
- V603 (76 pages)
- DX3500 (92 pages)
- C663 (85 pages)
- EasyShare C663 (74 pages)
- Z730 (97 pages)